Strut Channel
Channel: ABST’s metal framing channel is cold formed on modern rolling machines from low carbon steel manufactured according to BS 6946:1988. A continuos slot provides the ability to make attchements at any point.
Length: Standard length: 3000mm with ± 3.2mm length tolerance. Custom lengths are available upon request.
Finishes: Standard Finishes: Pre-Galvanized finish (ASTM A653M coating G90 and G60). Hot Dipped galvanized after fabrication (ASTM A123 or BS EN ISO1461:2009). Other custom coatings are available upon request.
Metal Framing Channels
Selection Chart | ||
Channel Dimensions | ||
Height "H" | Width "W" | Thickness |
21.0 mm | 41.0 mm | 1.5 mm |
41.0 mm | 41.0 mm | 1.5 mm |
21.0 mm | 41.0 mm | 2.0 mm |
41.0 mm | 41.0 mm | 2.0 mm |
21.0 mm | 41.0 mm | 2.5 mm |
41.0 mm | 41.0 mm | 2.5 mm |
Plain Channel
Plain Channel | ||
Part No. | Thick. (mm) | Height |
SCH-120 | 1.50 | 21.00 |
SCH-140 | 1.50 | 41.00 |
SCH-220 | 2.00 | 21.00 |
SCH-240 | 2.00 | 41.00 |
SCH-320 | 2.50 | 21.00 |
SCH-340 | 2.50 | 41.00 |
Slotted Channel
Slotted Channel | ||
Part No. | Thick. (mm) | Height |
SCH-121 | 1.50 | 21.00 |
SCH-141 | 1.50 | 41.00 |
SCH-221 | 2.00 | 21.00 |
SCH-241 | 2.00 | 41.00 |
SCH-321 | 2.50 | 21.00 |
SCH-341 | 2.50 | 41.00 |
B2B Channel
B2B Channel | ||
Part No. | Thick. (mm) | Height |
SCH-122 | 1.50 | 21.00 |
SCH-142 | 1.50 | 41.00 |
SCH-222 | 2.00 | 21.00 |
SCH-242 | 2.00 | 41.00 |
SCH-322 | 2.50 | 21.00 |
SCH-342 | 2.50 | 41.00 |
CHANNEL CAPABALITIES
Technical Delivery Condition - Cold formed channels | ||
Sections | 41 x 21, 41 x 41, 41 x 62 and 41 x 82 | |
Slot size | 27 x 13 mm | |
Slot pitch | 50 mm +/- 1 mm | |
Tolerance | Section Drawings can be provided on request. | |
Thickness | 1.5 mm to 2.75 mm, as required | |
Length | 600 mm to 6000 mm, as required, tolerance -0 + 10 mm | |
Finish |
Hot Dip Galvanised (HDG), Pre Galvanised (PG), or Powder coated HDG - 45 microns, special coating on customer requirements. HDG after fabrication to standard BS EN ISO 1461 : 2009 PG - 7 microns (120 GSM) to 19 microns (275 GSM) as per requirement |
|
Base material |
HDG - EN10025-2 S235JR, or as per requirement. PG - EN 10346/DX51D Regular spangle, Chromated (6), unoiled, or as required |
|
Packing |
41 x 21 - 200 pieces per bundle 41 x 41 - 100 pieces per bundle 41 x 62 and 41 x 82 - 50 pieces per bundle |
|
Marking |
Channels are unmarked. Bundle marking - as per customer requirement. |
|
Back to back channels |
Can be provided as per customer requirement. For HDG, channels are joined by ARC/ Mig welding, about 18 mm long, each 30 cm. For PG, channels are joined by Spot welding, with cold Zinc spray being done on spot. |
|
Plain Channel | Channels without slots can be provided based on customer requirements | |
Serrated channels | Supply is without serrations. Light serration can be provided on channels, on request | |
Form | Capability 019, dated 20th Jul, 2019 |
Technical Delivery Condition - Cold formed channels | |
Sections | 1 5/8" x 13/16", 1 5/8" x 1 5/8", 1 5/8' x 2 7/16", 1 5/8" x 3 1/4" |
Slot size | 27 x 13 mm (1 1/16" x 1/2") |
Slot pitch | 50 mm (~ 2 inch) |
Tolerance | Section Drawings can be provided on request. |
Thickness | 12 gauge to 16 gauge |
Length | 2 feet to 20 feet. |
Finish |
Hot Dip Galvanised (HG), Pre Galvanised (PG), or Powder coated HDG - 45 microns, special coating on customer requirements. HDG after fabrication to standard ASTM A123 PG - 7 microns (G40) to 19 microns (G90) as per requirement |
Base material |
HG - ASTM A 1011 GR 33, or as per customer requirement. PG - ASTM A653 G33 or equivalent, or as per customer requirement |
Packing |
1 5/8" x 13/16" - 200 pieces per bundle 1 5/8" x 1 5/8" - 100 pieces per bundle 1 5/8" x 2 7/16" and 1 5/8" x 3 1/4" - 50 pieces per bundle |
Marking |
Channels are unmarked. Markings requirements, if any, to be reconfirmed. Bundle marking - as per customer requirement. |
Back to back channels |
Can be provided as per customer requirement. For HDG, channels are joined by ARC/ Mig welding, about 3/4" long, each about 1 1/4". For PG, channels are joined by Spot welding, with cold Zinc spray being done on spot. |
Plain Channel | Channels without slots can be provided based on customer requirements |
Serrated channels | Light serration can be provided on channels, based on customer requirements. |
Form | Capability 019, dated 20th Jul, 2019 |